COMPONENTS
AND FEATURES
Waterfall Valve
Some hot tubs are equipped with a waterfall feature.
To start this, please turn on one of the jet pumps
then turn the waterfall diverter clockwise until the
waterfall appears.
By opening and closing the waterfall diverter on the
hot tub surface, you can adjust the water flow from
high to low.
Jets and Valves
Your new hot tub or swim spa will include a variety
of jets which will provide a hydrotherapy massage
and will offer you various massage modes.
To find your suitable mode: adjust the diverter
valves and the air regulating valves.
(See page34 for jet descriptions)
Diverter Valves
The diverter Valves are the largest valves and allow you
to divert the water from one seat to another. Adjusting
the diverter valve allows you to increase the pressure
in one seat and reduce in another. When the diverter
is in the middle, even pressure will flow throughout the
different seats that the diverter controls.
Important: when the diverter is in the ‘middle
position’ the jets cannot provide the maximum
pressure.
Air Regulating Valve
The air control function allows you to enjoy
massages with different pressures from the jets.
By turning the air regulator on, you can control the
jet pressure by adding more air into the water flow.
Some seats will not work off of these regulators
and will instead have an air manifold inside the hot
tub that will constantly allow air
into the jets.
ENJO
YING
Y
OUR
HO
T TUB
OR
S
WIM
SP
A
| 33
