User’s Manual of WNAP-1260
-77-
recommend you to use this connection mode.
Dial On Demand
: If you select it, the system automatically
establishes a connection when a network access request from the
LAN is received. If no network access request is sent from the
LAN within the specified time of
Idle Timeout
, the system
automatically interrupts the connection. If you pay for Internet
access by time, you are recommended to use this connection
mode, which effectively saves the expense of Internet access.
Manually Connect:
If you select it, you need to manually set dialup
connection after startup.
Idle
Timeout
:
If the system does not detect any Internet access behavior within the
specified time of
Idle Timeout
, the system interrupts the Internet
connection
My IP Address
:
Enter your IP address. You can also leave this field blank
Subnet Mask
:
Enter the subnet mask. You can also leave this field blank
Sever Address
:
Enter the IP address of the server. You can also leave this field
blank
Gateway IP
Address
:
Enter the IP address of the gateway. You can also leave this field
blank
Domain Name
Server (DNS)
Address
:
Select
Use These DNS Servers
if you know that your ISP does not
automatically transmit DNS addresses to the router during login.
And enter the IP address of your ISP’s primary DNS server. Enter a
secondary DNS server address if available
MTU Size
:
Set the maximum transmission unit. The default value is
recommended
Router MAC
Address
:
See descriptions on setting
Router MAC Address
for DHCP
After finishing settings, click Apply to save the settings.
Summary of Contents for WNAP-1260
