Planet WNAP-1260, User Manual

Page: 36 / 154

User’s Manual of WNAP-1260
-28-
Step 3 Set the IP address of the LAN port of the repeater and enter the MAC address of the basic
station. Click
Next .
Figure 5-7
Step 4 Set the SSID, channel, and security encryption for the repeater. The channel cannot be set to
Auto . It is recommended to configure the repeater with the same security option as its base
station. Set the encryption password and note it down. Click Finish to complete the settings.
Figure 5-8
5.2.2. Central Base Station Configuration in the WDS Mode
Step 1 Set WNAP-1260 to the Router mode . (Set the three-way switch on the side panel to AP)
Step 2 Click Mode Settings and select Router Mode . (The default mode is Bridge Mode .)
Step 3 Choose Wireless Settings > WDS Function , select Enable WDS Function
Step 4 Enter the MAC address of the Repeater