Planet WNAP-1260, User Manual

Page: 83 / 154

User’s Manual of WNAP-1260
-75-
Object Description
 Login :
Enter the user name for PPPoE dialup provided by the ISP
 Password :
Enter the password for PPPoE dialup provided by the ISP
 Service Name :
If several PPPoE servers are available, specify one in this field
 Connection Mode :
 Always On : If you select it, the system automatically
establishes a connection. If WNAP-1260 is disconnected from
the network because of external factors when you are using
the Internet access service, the system attempts connection in
an interval of the specified time (for example, 10 seconds) until
the connection is established. If you pay for Internet access
monthly, we recommend you to use this connection mode.
 Dial On Demand : If you select it, the system automatically
establishes a connection when a network access request from
the LAN is received. If no network access request is sent from
the LAN within the specified time of
Idle Timeout , the system
automatically interrupts the connection. If you pay for Internet
access by time, you are recommended to use this connection
mode, which effectively saves the expense of Internet access.
 Manually Connect: If you select it, you need to manually set
dialup connection after startup.
 Idle Timeout :
If the system does not detect any Internet access behavior within the
specified time of
Idle Timeout , the system interrupts the Internet
connection.
 Domain Name
Server (DNS)
Address
:
Select Use These DNS Servers if you know that your ISP does not
automatically transmit DNS addresses to the router during login.
And enter the IP address of your ISP’s primary DNS server. Enter a
secondary DNS server address if available
 MTU Size :
Set the maximum transmission unit. The default value is
recommended
 Router MAC
Address
:
See descriptions on setting Router MAC Address for DHCP.
After finishing settings, click Apply to save the settings.