Planar WN-5040-720 User Manual Download Page 83

Page: 83 / 153

4.3 Controlling Margay with Remote

You can control Margay with the remote control or with RS232 commands.

Remote control

The remote control projects a series of IR (infra-

red) pulses to the Margay for control. Aim the remote
control at the screen and press

. The main menu

should be visible, if the lamp is on.

For a complete list of all remote actions, see

7.2 “Remote Control Buttons” on page 116.

Beeper

If Beeper is checked in the Miscellaneous menu,

the Margay will make a beep each time a remote but-
ton is pressed (and the Margay receives the signal).

If the Margay cannot perform the requested action,

it will beep three times, a triple beep. Triple beep will
happen whether Beeper is checked on not.

If the remote doesn’t work

• The batteries in the remote are dead or installed

wrong.

• The remote was not aimed at the screen.

• Something is blocking the IR receiver in the Mar-

gay.

• IR remote action was disabled by an RS232 com-

mand.

The remote control has a large spread of its IR
radiation. It is difficult from a distance to control only
one Margay in a wall. Step closer.

Summary of Contents for WN-5040-720


























































































































































Search results

Summary of Contents for WN-5040-720

Reviews:

Related manuals for WN-5040-720

Brands by name

Popular brands

Planar WN-5040-720, User Manual

Search results

Summary of Contents for WN-5040-720

Reviews:

Related manuals for WN-5040-720

Brands by name

Popular brands