Planar WN-5040-720 User Manual Download Page 71

Page: 71 / 153

3.4.3 Viewport Adjustment

The Viewport menus adjust the image on the DMD™.

What is the DMD?

DMD stands for Digital Micromirror Device. It is

Texas Instrument’s name for their patented chip that
produces the pictures in a DLP™ (Digital Light Pro-
cessing) system.

The DMD chip is about the size of a postal stamp

and contains, in the case of Margay, 1280 by 720 pix-
els.

What is Viewport?

The Viewport menu adjust the number of pixels

actually used on the DMD. You can’t increase this
number, naturally, but you can reduce it.

•

DMD Resolution

shows the resolution of the

DMD chip. This has nothing to do with the reso-
lution of the source picture.

•

Viewport

shows the number of DMD pixels being

used.

Summary of Contents for WN-5040-720


























































































































































Search results

Summary of Contents for WN-5040-720

Reviews:

Related manuals for WN-5040-720

Brands by name

Popular brands

Planar WN-5040-720, User Manual

Search results

Summary of Contents for WN-5040-720

Reviews:

Related manuals for WN-5040-720

Brands by name

Popular brands