Planar Bay Cat X SN-4620-1080 User Manual Download Page 8

Page: 8 / 159

1.1 What are the Main Features of Bay Cat X?

Flat screen, long backlight life (60,000 hours). Portrait or Landscape orientation

Bay Cat X is a 46" LCD display that can be wall-mounted
or mounted on a stand. The display can be portrait or land-
scape.

Bay Cat X is only 3.96" deep. Its aspect ratio is 1.77

(16:9). Its native resolution is HD (1920 × 1080). It accepts
a wide range of input pictures from VGA to UXGA in
either analog or digital (DVI).

For video it accepts NTSC, PAL, and SECAM as com-

posite, component, or S-Video.

Most important, it is easy to set up and adjust.

What features were added to Bay Cat X?

Bay Cat X was developed from Bay Cat (SN-4610-

1080), and adds these features and enhancements.

•

• Can be ordered in two different configurations: Base

Model and Video Model

• Automatic ambient light sensing and backlight adjust-

ment

• 40 memory slots for easy configuration switching

• Improved video performance

• Improved component serviceability

• Optional tabletop feet

Landscape

Portrait

Summary of Contents for Bay Cat X SN-4620-1080
































































































































































Search results

Summary of Contents for Bay Cat X SN-4620-1080

Reviews:

Related manuals for Bay Cat X SN-4620-1080

Brands by name

Popular brands

Planar Bay Cat X SN-4620-1080, User Manual

Search results

Summary of Contents for Bay Cat X SN-4620-1080

Reviews:

Related manuals for Bay Cat X SN-4620-1080

Brands by name

Popular brands