Planar Bay Cat X SN-4620-1080 User Manual Download Page 41

Page: 41 / 159

Adjusting with any picture

This procedure must be done

after

you adjust color bal-

ance (page 45).

1. Choose pictures that have blacks and whites repre-

sented as well as a variety of colors.

2. Adjust Contrast, Brightness, Saturation and Hue on

one

Bay Cat X until it looks satisfactory.

3. Adjust all the other Bay Cat Xs in the array so they

have the same values for Contrast, Brightness, Satura-
tion and Hue as the first Bay Cat X.

Saturation

Match

Adjust Saturation so the outside bars match
when Blue Only is checked.

Match

Hue

Adjust Hue so inside bars match when
Blue Only is checked.

Summary of Contents for Bay Cat X SN-4620-1080
































































































































































Search results

Summary of Contents for Bay Cat X SN-4620-1080

Reviews:

Related manuals for Bay Cat X SN-4620-1080

Brands by name

Popular brands

Planar Bay Cat X SN-4620-1080, User Manual

Search results

Summary of Contents for Bay Cat X SN-4620-1080

Reviews:

Related manuals for Bay Cat X SN-4620-1080

Brands by name

Popular brands