Planar Bay Cat X SN-4620-1080, User Manual

Page: 99 / 159

92
Size & Position Menu Options
Menu Item Description Setting(s)
Picture Position The position of the
image relative to the
sync signal Default value and range depends on the incoming signal
Picture position is automatically adjusted during setup based
on where the edge of the image is found (see “Advanced
Options > Auto Setup Options” on page 116).)
Horizontal Position When this option is
selected, you can
move the image hori-
zontally using the -/+
buttons. Pressing - moves the image to the left
Pr moves the image to the right
Vertical Position When this option is
selected, you can
move the image verti-
cally using the -/+
buttons. Pressing - moves the image down
Pr moves the image up
Zoom Window Top & Left Zoom adjusts the size of the picture. In Zoom Top & Left, the up-down arrows move
the top edge, and the right-left arrows move the left side
Zoom Window Bottom & Right
Viewport Window Top & Left Viewport shrinks the picture. This feature is most useful when each unit in a wall is
fed a separate picture from a video processor. In such a case, you can’t zoom the pic-
ture smaller, but you can shrink the picture with Viewport
Viewport Window Bottom & Right
Reset All Windows to Default Reset All Windows to Default makes all Zoom and Viewport values zero. If Big Picture
is being used and Wall Mode is on, the Zoom values go to the Big Picture defaults