Planar Bay Cat X SN-4620-1080, User Manual

Page: 56 / 159

49
3.4 Tiling a Display
Whether you use Planar’s Big Picture
TM
or an external video processor, your goal is to make the picture fit
together properly at the edges.
Using an external processor
The processor divides a single picture into several sec-
tions and sends each part on a separate cable. Connect these
cables to the proper Bay Cat X.
You can still position the picture with the Bay Cat X
controls, or, with most processors, position and zoom the
picture with the processor controls.
Using Planar’s Big Picture
TM
Loop the same source through all the Bay Cat Xs in a
wall (See “Connecting Picture Sources” on page 17.).
For each unit, set the Wall menu for the same wall size.
To show the same source on all the Bay Cat Xs in an array
you’ll need to use an external distribution amplifier. For
each unit, set the Aspect Ratio & Wall menu for the same
array size.
Wall Width
and
Wall Height
are the number of units
wide and high for the picture . This may be different from
the physical array size. You could build a 4x4 array of Bay
Cat Xs and use Wall Mode to put a single picture on the
four units in the upper left corner, for instance.
• Unit Column and Unit Row represent the position of
the Bay Cat X in this “array.” For example, in the 4 x 3
array of Bay Cat Xs shown below, unit numbering
starts at the top left corner of the array. This unit would
M a i n M e n u
P i c t u r e
S i z e & P o s i t i o n
A s p e c t R a t i o & Wa l l
M e m o r y
D i a g n o s t i c s
A d v a n c e d O p t i o n s
P r o g r a m I n f o r m a t i o n
A s p e c t R a t i o & Wa l l
S c a l e M o d e C r o p
J u s t i f y C e n t e r
O v e r s c a n 0 %
B o r d e r C o l o r B l a c k
Wa l l W i dt h 1
Wa l l H e i g h t 1
U n i t C o l u m n 1
U n i t R o w 1
Wa l l M o d e
F r a m e C o m p e n s a t i o n
F r a m e H e i g h t 9 7 p i x e l s
F r a m e Wi dt h 1 5 7 p i x e l s