Planar Bay Cat X SN-4620-1080, User Manual

Page: 32 / 159

25
3.2.1 Selecting the Picture
Selecting the source (picture) manually is usually quicker than using the
SETUP
button.
Selecting the picture is really selecting the input connector.
If you have the Base Model, you have only one connec-
tor, which is a HD-15 for analog computer sources. If you
have the Video Model, you have the following additional
connectors:
Computer sources
Use the HD-15 connector for standard analog inputs, the
type we’ve used for years with computers. For digital
inputs, use the DVI connector. Either of these accepts pic-
tures of the following common standards as well as many,
many others:
Component video sources
Component video sources are assumed to be YPbPr and
are brought into the Bay Cat X via the Analog ports.
DVD and component video sources
DVD players have composite video and S-Video out-
puts, and sometimes have component video outputs from
three RCA connectors. Component video sources are
assumed to be YPbPr, so you do not need to specify the
colorspace.
✎
HDCP (High-Definition Copy Protection) is not
supported.
Composite Video and S-Video
These two inputs accept NTSC and PAL. The Compos-
ite connector also accepts SECAM video.
To manually select the source
1. After the display is on, on the remote press
FREQ
/
PHASE
:
This opens the Picture menu.
Video Model
Analog
Digital
Component (YPbPr)
Composite
S-Video
Type Resolution
VGA 640 x 480
SVGA 800 x 600
XGA 1024 x 768
SXGA 1280 x 1024
WXGA 1360 x 768, 1366 x 768
UXGA 1600 x 1200
HD1920 1920 x 1080
VESA 640 x 400
P i c t u r e
S o u r c e A n a l o g
C o l o r s pa c e R G B
S y n c Ty p e S e pa r a t e H & V
Ve r t i c a l F r e q u e n c y ( f r a m e l o c k e d ) 6 0 H z
H o r i z o n ta l F r e q u e n c y 5 0 . 0 0 k H z
P i x e l F r e q u e n c y 8 0 . 1 0 M H z
H o r i z o n ta l R e s o l u t i o n 1 3 6 6
Ve r t i c a l R e s o l u t i o n 7 6 8
F r e q u e n c y
1 6 0 2
P h a s e
2 2 . 5°
S h a r p n e s s S h a r p e s t
I n p u t L e v e l s