Pipistrel VELIS Electro, Pilot Operating Handbook

Page: 113 / 244

4-5
VELIS Electro
Pilot's Operating Handbook
POH - 128 - 00 - 40 - 001
PAGE REV. 0
PAGE
SECTION 4
NORMAL PROCEDURES
10 MASTER switch ON
11
Batt overtemp warning lights -
Annunciator - Haptic stall warning
CHECK SELFTEST
(see section 7.6.7 for details)
12 AVIONICS switch ON
13 Circuit breakers CHECK ENGAGED
14 Instruments CHECK functional
15 Elevator trim Centered
16 Power lever CUT OFF
17 BAT EN switch ON
18 PWR EN switch ON
19 EPSI570C display* / annunciator
Flight/System page available,
CHECK no warnings/cautions
20 AUX BATT Voltage on EPSI570C CHECK > 13V
21
Battery %SOC, SOH, temperature
and status "ACTIVE"(system page)
CHECK
22
Engine (power controller and
motor) temperatures
CHECK
23 BAT EN switch OFF
24 PWR EN switch OFF
25 AVIONICS switch OFF
26 MASTER switch OFF
* CAUTION:
Do not take o ff if normal FLIGHT/SYSTEM operation mode is
not available and functional on EPSI570C display.
LEFT FUSELAGE
1 COM antenna (top) Condition and attachment
2 Wing / fuselage seal CHECK
3 XPDR antenna (underside) Condition and attachment
4 Static pressure port CHECK for blockage
5 Battery cooling system inlet/outlet CHECK no obstructions
6 Rear battery compartment panel CHECK closed