Pipistrel VELIS Electro, Pilot Operating Handbook

Page: 234 / 244

PAGE
VELIS Electro
Pilot's Operating Handbook
POH - 128 - 00 - 40 - 001
PAGE REV. 0
9-A1-8
SECTION 9
APPENDIX
Temp:
Shows the max temp inside the battery pack, detected
by the temperature sensors
MIN Volt:
MAX Volt:
Minimum and Maximum voltage value of the cells in
each battery pack.
Voltage:
Current:
Battery packs voltage and current.
Negative values possible during charging.
Balancing: Indicates if cell balancing is active
Coolant:
Temperature of the battery coolant sensor in battery
cooling system diagram - Section 7.6.3.
ENGINE section
Power controller and motor
Parameter Description
Status: Status of the power controller
Temp m: Motor temperature
Temp I Power controller temperature
Coolant - IN:
Engine coolant temperature - Sensor "coolant cold" in
engine cooling system diagram - Section 7.6.3.
Coolant - OUT:
Engine coolant temperature - Sensor "coolant hot" in
engine cooling system diagram - Section 7.6.3.
Hobbs:
Hobbs meter of the power controller (Counts the
cumulated power controller time - when PWR EN switch is
ON. The time does not depend on motor/propeller RPM)
NOTE : If power controller or motor temperature sensor failure occurs, the
mission has to be aborted. In this case, Coolant IN and Coolant OUT tem-
perature values (EPSI570C – SYSTEM page) can help the pilot identify en-
gine cooling malfunction if temperatures rise abnormally.
POWER LEVER section
Power lever
Parameter Description
Status: Status of the component.