Pioneer SC-9540 Operating Instructions Manual Download Page 138 | Manualshive

Page: 138 / 138

background image

Printed in

<ARB7421-A>

Published by Pioneer Corporation.
Copyright © 2009 Pioneer Corporation.
All rights reserved.

PIONEER CORPORATION

4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan

PIONEER ELECTRONICS (USA) INC.

P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404

PIONEER ELECTRONICS OF CANADA, INC.

300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada TEL: 1-877-283-5901, 905-479-4411

PIONEER EUROPE NV

Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11

PIONEER ELECTRONICS ASIACENTRE PTE. LTD.

253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555

PIONEER ELECTRONICS AUSTRALIA PTY. LTD.

178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300

PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.

Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D. F. 11000 TEL: 55-9178-427 0

K002_B_En

Should this product require service in the U.S.A. and you
wish to locate the nearest Pioneer Authorized Independent
Service Company, or if you wish to purchase replacement
parts, operating instructions, service manuals, or
accessories, please call the number shown below.

1 – 8 0 0 – 4 2 1 – 1 4 0 4

Please do not ship your product to Pioneer without first
calling the Customer Support at the above listed number for
assistance.

Pioneer Electronics Service, Inc.
P.O. BOX 1760, Long Beach,
CA 90801-1760, U.S.A.

For warranty information please see the Limited Warranty
sheet included with your product.

Should this product require service in Canada, please
contact a Pioneer Canadian Authorized Dealer to locate the
nearest Pioneer Authorized Service Company in Canada.
Alternatively, please contact the Customer Satisfaction
Department at the following address:

Pioneer Electronics of Canada, Inc.
Customer Satisfaction Department
300 Allstate Parkway, Markham, Ontario L3R 0P2
1-877-283-5901
905-479-4411

For warranty information please see the Limited Warranty
sheet included with your product.

Si ce produit doit être réparé au Canada, veuillez vous
adresser à un distributeur autorisé Pioneer du Canada pour
obtenir le nom du Centre de Service Autorisé Pioneer le plus
près de chez-vous. Vous pouvez aussi contacter le Service à
la clientèle de Pioneer:

Pioneer Électroniques du Canada, Inc.
Service Clientèle
300, Allstate Parkway, Markham, Ontario L3R 0P2
1-877-283-5901
905-479-4411

Pour obtenir des renseignements sur la garantie, veuillez
vous reporter au feuillet sur la garantie restreinte qui
accompagne le produit.

S018_C_EF

SC-9540.book 140 ページ２００９年４月２４日　金曜日　午後１時４２分

«
...
136
137
138

Summary of Contents for SC-9540











































































































































Reviews:

No comments

Related manuals for SC-9540

Brand: Raymer Pages: 3

TRIPP LITE Series

Brand: Eaton Pages: 16

Brand: Alinco Pages: 4

Brand: Tecsun Pages: 1

Personal PA Receiver PPA R35N

Brand: Williams Sound Pages: 6

Brand: Lectrosonics Pages: 16

Brand: Jensen Pages: 103

AM-FM Receiver 870-20

Brand: Raymer Pages: 4

Brand: AMIMON Pages: 56

Brand: ENFORCER Pages: 8

Brand: Topfield Pages: 16

Brand: RF Application Pages: 7

Brand: Grundig Pages: 30

Brand: Mocreo Pages: 2

Brand: Vectronics Pages: 23

Brand: Rosen Pages: 17

Brand: SecurityMan Pages: 17

Brand: RADICAL Pages: 13

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands