3
Turn the ignition switch to ON or ACC.
If the car
’
s air conditioner or heater is turned
on, turn it off. Noise from the fan in the air
conditioner or heater may prevent correct auto
TA and EQ.
#
Press
SOURCE
to turn the source on if this
unit is turned off.
4
Select the position for the seat on
which the microphone is placed.
Refer to
Using the position selector
on page
70.
#
If no position is selected before you start auto
TA and EQ,
FRT-L
is selected automatically.
5
Press SOURCE and hold until the unit
turns off.
6
Press and hold EQ to enter the auto TA
and EQ measurement mode.
7
Plug the microphone into the micro-
phone input jack on the multi-channel pro-
cessor.
8
Press
a
to start the auto TA and EQ.
9
Get out of the car and close the door
within 10 seconds when the 10-second
count-down starts.
The measurement tone (noise) is outputted
from the speakers, and auto TA and EQ be-
gins.
#
When all speakers are connected, auto TA
and EQ is completed in about nine minutes.
#
To stop auto TA and EQ, press any keys.
#
To cancel auto TA and EQ part way through,
press
BAND
.
10 When auto TA and EQ is completed,
COMPLETE is displayed.
When correct measurement of car interior
acoustic characteristics is not possible, an
error message is displayed. (Refer to
Under-
standing auto TA and EQ error messages
on
page 84.)
11 Press BAND to cancel the auto TA and
EQ mode.
Available accessories
En
75
Section
04
A
vailable
accessories