Resume playback (Bookmark)
The Bookmark function lets you resume play-
back from a selected scene the next time the
disc is loaded.
To perform this function, set the remote con-
trol to
DVD
mode.
!
This function is available for DVD video.
%
During playback, press BOOKMARK at
the point you want to resume playback
next time.
The selected scene will be bookmarked so that
playback resumes from that point next time.
You can bookmark up to five discs. After that,
the oldest bookmark is replaced by the new
one.
#
To clear the bookmark on a disc, press and
hold
BOOKMARK
during playback.
#
You can also bookmark a disc by pressing and
holding
EJECT
at the point you want to bookmark.
Next time you load the disc, playback will resume
from the bookmarked point. Note that you can
only bookmark one disc using this method. To
clear the bookmark on a disc, press
EJECT
.
Automatic playback of DVDs
When a DVD disc with DVD menu is inserted,
this unit will cancel the DVD menu automati-
cally and start playback from the first chapter
of the first title.
!
This function is available for DVD video.
!
Some DVDs may not operate properly. If
this function is not fully operated, turn this
function off and start playback.
%
Press AUTO PLAY to turn automatic
playback on.
A.PLAY ON
is displayed.
#
To turn automatic playback off, press
AUTO PLAY
again.
#
When the automatic playback is on, you can-
not operate repeating play of DVD disc (refer to
Repeating play
on the next page).
CM skip/CM back
This function skips a reproduced image for a
specified time. If the currently playing disc
contains commercials, it is possible to skip
them.
%
To skip progressively backward or for-
ward, press CM BACK or CM SKIP.
Each time you press
CM BACK
or
CM SKIP
it
changes steps in the following order:
CM back
5 sec.
—
15 sec.
—
30 sec.
—
1.0 min.
—
2.0
min.
—
3.0 min.
CM skip
30 sec.
—
1.0 min.
—
1.5 min.
—
2.0 min.
—
3.0
min.
—
5.0 min.
—
10.0 min.
After displaying the selected option for two
seconds, reproduced image skips.
#
If you do not operate the function within about
eight seconds, the display is automatically re-
turned.
Return to the specified scene
You can return to the specified scene where
the DVD you are currently playing has been
preprogrammed to return.
!
This function is available for DVD video.
%
Press RETURN to return to the specified
scene.
#
If a specified scene has not been prepro-
grammed in DVD disc, this function is not possi-
ble.
Selecting the title list
When the separately sold display is connected
to this unit, the listed information will appear
on it.
Operating this unit
En
23
Section
03
Operating
this
unit