Setting for rear view camera (back
up camera)
CAUTION
Pioneer recommends the use of a camera
which outputs mirror reversed images, other-
wise screen image may appear reversed.
You can install a rear view camera onto the AV
input and display a rear view camera video.
When the gear shift is in
REVERSE (R)
posi-
tion, the video automatically switches to a rear
view camera video. (For more details, consult
your dealer.)
!
After you set up the rear view camera set-
ting, move the gear shift in
REVERSE (R)
and confirm if a rear view camera video
can be shown on the display.
!
If the display should be switched to a rear
view camera video by error while you are
driving forward, change the rear view cam-
era setting.
!
When you select
CAMRA
in
V.IN
, you can
select
CAMRA
.
1
Press FUNCTION to select CAMRA.
2
Press
c
or
d
to select an appropriate
setting.
!
BAT
–
When the polarity of the connected
lead is positive while the gear shift is in
RE-
VERSE (R)
position
!
GND
–
When the polarity of the connected
lead is negative while the gear shift is in
REVERSE (R)
position
Setting the rear output and
subwoofer controller
This unit
’
s rear output (rear speaker leads out-
put and RCA rear output) can be used for full-
range speaker (
R-SP FULL
) or subwoofer
(
R-SP S/W
) connection. If you switch the rear
output setting to
R-SP S/W
, you can connect a
rear speaker lead directly to a subwoofer with-
out using an auxiliary amp.
1
Press FUNCTION to select R-SP.
2
Press
a
or
b
to switch the rear output
setting.
Pressing
a
or
b
will switch between
R-SP FULL
(full-range speaker) and
R-SP S/W
(subwoofer) and that status will be displayed.
#
When no subwoofer is connected to the rear
output, select
R-SP FULL
.
#
When a subwoofer is connected to the rear
output, set for subwoofer
R-SP S/W
.
Notes
!
Even if you change this setting, there is no
output unless you turn the subwoofer output
on (refer to
Using subwoofer output
on page
44).
!
If you change this setting, subwoofer output
in the audio menu return to the factory set-
tings.
!
Both rear speaker leads outputs and RCA rear
output are switched simultaneously in this
setting.
Switching the Ever Scroll
When Ever Scroll is set to ON, recorded text in-
formation scrolls continuously in the display.
Set to OFF if you prefer the information to
scroll just once.
1
Press FUNCTION to select E-SCRL.
2
Press
a
or
b
to turn E-SCRL on or off.
Setting the TV signal
When this unit is connected to a TV tuner, you
need to adjust the TV signal suitable to your
country TV signal setting.
Operating this unit
En
53
Section
03
Operating
this
unit
