DSP
Symptom
Cause
Action (See)
Speakers are not available to be
adjusted.
Their size settings is at
OFF
.
Make the correct size settings. (Page 76)
Time alignment is not available.
Listening position is not set cor-
rectly.
Set listening position correctly. (Page 70)
Speaker size settings is at
OFF
.
Make the correct size settings. (Page 76)
The subwoofer is not available to
switch its phase.
The subwoofer is set to
OFF
.
Set the subwoofer to
ON
. (Page 76)
Bass content is not heard.
The subwoofer is set to
OFF
and yet
other speakers are set to
OFF
or
SML
in size.
Make the correct settings. (If no subwoofer is
installed, the front or rear speaker needs to
be set to
LRG
.) (Page 76)
Ocassionally no sounds are out-
put when Dolby Pro Logic II is
turned on.
The center speaker setting is at
SML
or
LRG
whereas no center speaker
is installed.
Change the center speaker size setting to
OFF
. (If the audio source is mono and Dolby
Pro Logic II is turned on, sound is heard over
the center speaker only.) (Page 76)
Occasionally no sounds are
heard over speakers other than
the center one.
Dolby Pro Logic II is turned on.
Turn Dolby Pro Logic II off. (If the audio
source is mono and Dolby Pro Logic II is
turned on, sound is heard over the center
speaker only.) (Page 70)
Turning dynamic range control
on has no effects.
The currently reproduced sound is
not Dolby Digital coded.
The feature is only effective on Dolby Digital
sounds. (Page 71)
No sounds are heard.
Optical cables are incorrectly con-
nected.
Connect the cables correctly.
Error messages
When you contact your dealer or your nearest Pioneer Service Center, be sure to record the error
message.
Message
Cause
Action
ERROR02-XX
Dirty disc
Clean disc.
Scratched disc
Replace disc.
The disc is loaded upside down
Check that the disc is loaded correctly.
R ERROR
The disc does not have the same re-
gion number as this unit
Replace the DVD video with one bearing the
correct region number.
NON-PLAY
This type of disc cannot be played
by this unit
Replace the disc with one this unit can play.
HEAT
The temperature of this unit is out-
side the normal operating range
Wait until the unit
’
s temperature returns to
within normal operating limits.
Additional Information
En
83
Appendix
Additional
Information
