1
Press FUNCTION to select TV.
2
Press
c
or
d
to select an appropriate
TV signal.
PAL
—
SECAM
Note
About your country TV signal, consult with your
nearest Pioneer dealer.
Correcting distorted sound
Only when the multi-channel processor (e.g.,
DEQ-P6600) is connected to this unit, you can
operate this function.
You can minimize distortion that may be
caused by the equalizer curve settings.
Setting an equalizer level high can cause dis-
tortion. If high sound is crippled or distorted,
try switching to
LOW
. Normally, leave the set-
ting at
HIGH
to ensure quality sound.
1
Press FUNCTION to select D.ATT.
2
Press
c
or
d
to select LOW or HIGH.
Resetting the audio functions
Only when the multi-channel processor (e.g.,
DEQ-P6600) is connected to this unit, you can
operate this function.
You can reset audio functions other than the
following settings.
!
Volume setting (refer to
Adjusting the vo-
lume
on page 15)
!
Listening position setting (refer to
Using
the position selector
on page 70)
!
Fader/balance setting (refer to
Using bal-
ance adjustment
on page 69)
!
SLA (source level adjustment) setting (refer
to
Adjusting source levels
on page 72)
!
Dynamic range control (refer to
Using the
dynamic range control
on page 71)
!
Direct control setting (refer to
Using the di-
rect control
on page 72)
!
Down-mix setting (refer to
Using the down-
mix function
on page 71)
1
Press FUNCTION to select A.RESET.
2
Press
a
to display RESETOK?.
#
To cancel resetting the audio functions, press
BAND
.
3
Press
d
to display REALLY?.
#
To cancel resetting the audio functions, press
BAND
.
4
Press
a
to reset audio functions.
COMPLETE
appears in the display.
Operating this unit
En
54
Section
03