Operating the DSP menu
1
DSP display
Shows the DSP status.
2
Subwoofer indicator
Shows when the subwoofer output is turned
on.
%
Press AUDIO to display the DSP func-
tion names.
Press
AUDIO
repeatedly to switch between
the following DSP functions:
FADER
(balance adjustment)
—
POSI
(position
selector)
—
PLII
(Dolby Pro Logic II)
—
music
mode adjust
—
sound field control
—
Lo/Ro
(down mix)
—
DRC
(dynamic range control)
—
DIRECT
(direct)
—
SLA
(source level adjust-
ment)
#
You can also use
A.MENU
button on the re-
mote control to select an audio menu.
#
When the rear output setting is
R-SP S/W
, you
cannot adjust front/rear speaker balance. Refer to
Setting the rear output and subwoofer controller
on page 53.
#
When playing discs recorded with more than
96 kHz sampling frequency, you cannot use audio
functions. Also, equalizer curve setting,
POSI
,
AT EQ
and
TA AUTO TA
will be cancelled.
#
When playing discs recorded with more than
96 kHz sampling frequency, audio is outputted
from front speakers only.
#
When both the center speaker and the rear
speaker are set to OFF in the speaker setting, you
cannot switch to
PLII
.
#
All audio functions are locked out when the di-
rect control is on except
VOLUME
and
PLII
.
#
When you select
MUSIC
in the
PLII
, you can
select adjusting music mode.
#
When playing other than the DVD disc, you
cannot switch to
DRC
.
#
When selecting the FM as the source, you
cannot switch to
SLA
.
#
To return to the display of each source, press
BAND
.
Note
If you do not operate the DSP function within
about 30 seconds, the display is automatically re-
turned to the source display.
Using balance adjustment
You can change the fader/balance setting so
that it can provide you an ideal listening envir-
onment in all occupied seats.
1
Press AUDIO to select FADER.
#
If the balance setting has been previously ad-
justed,
BAL
will be displayed.
2
Press
a
or
b
to adjust front/rear speak-
er balance.
Each press of
a
or
b
moves the front/rear
speaker balance towards the front or the rear.
FADER F25
to
FADER R25
is displayed as the
front/rear speaker balance moves from front to
rear.
#
FADER 0
is the proper setting when only two
speakers are used.
3
Press
c
or
d
to adjust left/right speaker
balance.
When you press
c
or
d
,
BAL 0
is displayed.
Each press of
c
or
d
moves the left/right
speaker balance towards the left or the right.
BAL L25
to
BAL R25
is displayed as the left/
right speaker balance moves from left to right.
Available accessories
En
69
Section
04
A
vailable
accessories
