Message
Cause
Action
PROTECT
All the files on the inserted disc are
secured by digital rights manage-
ment (DRM)
Replace disc.
Error messages on the display
Message
Cause
Action
ERROR-02-XX
Dirty disc
Clean disc.
Scratched disc
Check that the disc is loaded correctly.
The disc is loaded upside down
Check that the disc is loaded correctly.
THERMAL PROTECTION IN
MOTION
The temperature of this unit is out-
side the normal operating range
Wait until the unit
’
s temperature returns to
within normal operating limits.
DIFFERENT REGION DISC
The disc does not have the same re-
gion number as this unit
Replace the DVD video with one bearing the
correct region number.
NON-PLAYABLE DISC
This type of disc cannot be played
by this unit
Replace the disc with one this unit can play.
PROTECTED DISC
All the files on the inserted disc are
secured by digital rights manage-
ment (DRM)
Replace disc.
Understanding auto TA and EQ error messages
When correct measurement of car interior acoustic characteristics is not possible using the auto
TA and EQ, an error message may appear on the display. If an error message appears, refer to the
table below to see what the problem is and the suggested method of correcting the problem. After
checking, try again.
Message
Cause
Action
ERR_MIC
Microphone is not connected.
Plug the supplied microphone securely into
the jack.
ERR_FSP
,
ERR_FLSP
,
ERR_FRSP
,
ERR_CSP
,
ERR_RSP
,
ERR_RLSP
,
ERR_RRSP
,
ERR_SW
The microphone cannot pick up the
measuring tone of a speaker.
!
Confirm that the speakers are connected
correctly.
!
Correct the input level setting of the power
amp connected to the speakers.
!
Set the microphone correctly.
ERR_NOIS
The surrounding noise level is too
high.
!
Stop your car in a place that is as quiet as
possible, and switch off the engine, air condi-
tioner or heater.
!
Set the microphone correctly.
Additional Information
En
84
Appendix
