27
Chapter
58
En
Connecting the power cord
antenna jack
Power supply
Power cord
Yellow/black
If you use an equipment with Mute function, wire this lead to the Audio Mute lead on
that equipment. If not, keep the Audio Mute lead free of any connections.
Light green
Used to detect the ON/OFF status of the parking brake. This lead
must be connected to the power supply side of the parking brake
switch.
Blue/white
Connect to system control terminal of the
power amp (max. 300 mA 12 V DC).
Power supply side
Parking brake
switch
This product
Violet/white
Of the two lead wires connected to the back lamp, connect the one in which the
voltage changes when the gear shift is in the REVERSE (R) position. This connection
enables the unit to sense whether the car is moving forwards or backwards.
4 m
Hideaway 1 seg digital TV tuner
(GEX-1550DTV (sold separately))
RGB cable (Supplied with Hideaway 1 seg digital TV tuner)
Fuse (10 A)
Microphone
Left
Right
Front speaker
Front speaker
Rear speaker or
Subwoofer (4
Ω
)
White
Gray
Gray/black
White/black
Green
Violet
Green/black
Violet/black
Violet
Violet/black
Not used.
Green
Green/black
When using a subwoofer of 70 W (2
Ω
), be sure to connect with Violet and Violet/black leads of this unit.
Do not connect anything to Green and Green/black leads.
Subwoofer (4
Ω
)
× 2
Rear speaker or
Subwoofer (4
Ω
)
When a subwoofer is connected to this
product instead of a rear speaker, change the
rear output setting in the initial setting. The
subwoofer output of this product is monaural.
Note
With a two-speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.
Wired remote input
Hard-wired remote control adapter can be connected (sold separately).
Yellow
To terminal supplied with power regardless of
ignition switch position.
Orange/white
To lighting switch terminal.
Black (ground)
To vehicle (metal) body.
Red
To electric terminal controlled by ignition
switch (12 V DC) ON/OFF.
Ground side
