UPS PIco HV3.0A Firmware Code 040 Print Date 18.08.2017
Designed and Manufactured by PiModules and ModMyPi
www.pimodules.com www.modmypi.com
•
Terminal Block Connectivity on Independent from Raspberry Pi, and battery
backed-up 3.3 V 200 mA supply (available also when Raspberry Pi is not
powered)
•
Terminal Block Connectivity on ESD protected 1-wire interface
•
Terminal Block Connectivity on Independent from Raspberry Pi and battery
backed-up 5V source 750 mA (available also when Raspberry Pi is not powered)
•
12V RS232 Interface Level Converter connectable to the Raspberry Pi Primary
Serial Port or Independent Secondary Serial Port offered by UPS PIco HV3.0A
with Terminal Block Connectivity
•
Terminal Block Connectivity on Auxiliary interface to the bi-stable (zero power)
Relay offered by the UPS PIco HV3.0A
•
Terminal Block Connectivity on Optical Isolated Interface
–
readable as digital
or analog input offered by the UPS PIco HV3.0A
•
Terminal Block Connectivity on ESD Protected 12 bit A/D converters pre-scaled
to: 5V, 15V and 30V (user selectable) accessed by I
2
C on Raspberry Pi®
•
Voltage Follower and scaled of 0 - 4.8V A/D with Terminal Block Connectivity