UPS PIco HV3.0A Firmware Code 040 Print Date 18.08.2017
Designed and Manufactured by PiModules and ModMyPi
www.pimodules.com www.modmypi.com
Put the Bi Stable Relay Pins trough the holes
Figure 39 Put the Bi-Stable Relay on the PCB
Put the PCB with Relay to the opposite side and solder
only
one pin. It is very important to
solder only one pin, as if you made a mistake it will be easy to correct it.
Figure 40 Soldering of one pin of the Bi-Stable Relay
Then make sure that everything (after double checking) are OK, and proceed with soldering
of all other Pins.
