UPS PIco HV3.0A Firmware Code 040 Print Date 18.08.2017
Designed and Manufactured by PiModules and ModMyPi
www.pimodules.com www.modmypi.com
sudo i2cset -y 1 0x6d 0x00 0001
w
running for 1 minute
2.
Enter
Action_Repetition_Time
to define the
Repeated Time of the same Action in
minutes. Measuring time from beginning of Previous Action to the beginning of the
next one
sudo i2cset -y 1 0x6d 0x02 02
repeated every 2 minutes
3.
Enter
Action_Multiplier
to define how many times the
Action
will be repeated within
the same
Sequence
sudo i2cset -y 1 0x6d 0x03 60
repeated 60 times
4.
Enter
Sequence_Repetition_Time
to define Repeated Time of the Saquence
sudo i2cset -y 1 0x6d 0x04 24
repeated every 24 hours
0x6e -> ETR SAS Actions Stamp
The third
ETR SAS
registers set is the
Actions Stamp
, located at
0x6e
. Acording to specification
of the 1
st
Example need to set below values:
Action RPi_PON
= 0x01;
means that Action of this Scheduler will be
Raspberry Pi® ON
and
(after Action Duration Time)
OFF
The data entering should looks like below (it important to follow the below order to avoid
any mistake in programming):
2.
Enter
Action RPi_PON
to specify what action need to be executed
sudo i2cset -y 1 0x6e 0x00 01
for
RPi_PON = 0x01
0x6f -> ETR SAS Events Stamp
Not involved, as also not implemented in this versionof firmware.