UPS PIco HV3.0A Firmware Code 040 Print Date 18.08.2017
Designed and Manufactured by PiModules and ModMyPi
www.pimodules.com www.modmypi.com
12.
Once the script has been installed, it can be installed to the `SystemD` with the
following command
sudo systemctl enable picofssd.service
13.
Now when the Pi is rebooted the daemon should start automatically.
The Daemons can be started and stopped in the usual way for SystemD:
sudo systemctl start picofssd.service
sudo systemctl stop picofssd.service
Important Notices:
1.
Both PIco packages must be installed even if not used.
2.
It is very important to start/stop the Daemons Service when doing Hardware
Reset of the PIco HV3.0 to avoid undefined situations with pulse train recognition
procedure by the system. Resetting the PIco with Not Stopped the Daemon
Service can cause an unexpected system shutdown (however without card
corruption - system will just safety shutdown).
