UPS PIco HV3.0A Firmware Code 040 Print Date 18.08.2017
Designed and Manufactured by PiModules and ModMyPi
www.pimodules.com www.modmypi.com
system is powered in a different way than in
RPI Powering Mode.
0x01
bat_run_time
Byte
Common
R/W
On Battery Powering Running Time when
cable power loses or not exist. After that time
a File Safe Shut Down Procedure will be
executed and System will be shut downed
without restart. Battery power will be
disconnected. System is in sleep mode (LPR)
and RTC is running.
If Raspberry Pi cable power returns again
system will be start automatically.
If during the sleep mode (LPR) the F button
will be pressed for longer time than 2 seconds
(with battery or cable powering) Raspberry Pi
will re-start again.
Value of 0xff (255) disable this timer, and
system will be running on battery powering
until battery discharge to 3.4V for LP battery
and 2.8V fro LF Battery type.
Factory default value is 60 seconds
Each number stands for 1 minute of Battery
Running. Default Value is 0, and the highest
Value is 0xFE. If user will enter i.e. 2, the
Battery Running time will be 60 s 2 x
60 seconds = 180 seconds. After that time
system will be shutdown. If user after that
will press again F button system will restart
and run for 180 seconds again and then
shutdown.
Read:
Anytime, Return actual
fssd_timeout
value
Write:
0x00
–
0xFF
Any change on this register will cause
immediate writing of the new value to the
PIco EEPROM
0x02
rs232_rate
Byte
Common
R/W
Writing to this register sets the UPS PIco HV3.0
Serial Port to the following settings:
0x00 - UPS PIco HV3.0
Serial Port is OFF
Default value
0x01 - UPS PIco HV3.0
Serial Port is ON and
data rate is set to 4800 pbs
0x02 - UPS PIco HV3.0
Serial Port is ON and
data rate is set to 9600 pbs
0x03 - UPS PIco HV3.0
Serial Port is ON and
data rate is set to 19200 pbs
0x04 - UPS PIco HV3.0
Serial Port is ON and
data rate is set to 34600 pbs
0x05 - UPS PIco HV3.0
Serial Port is ON and
data rate is set to 57600 pbs
0x0F - UPS PIco HV3.0
Serial Port is ON and
data rate is set to 115200 pbs
0x05
STA_timer
Byte
Common
R/W
Still Alive Timeout Counter in seconds
