piezosystemjena d-Drive, Instruction Manual

Page: 66 / 89

Geschäftsführer: Dr. Bernt Götz • Telefon 03641/66880 • Fax 03641/668866 • www.piezojena.com
66
USB 1.1: plug Series A
Pin designation description
1 VCC operating v5V
2 D- data -
3 D+ data +
4 GND
operating voltage Ground
table 8: pinning
8.4.4 technical data EDSx
EDS1 EDS2
Power consumption: max. 0.9W max. 1.2W
Voltage / current
requirements: +5V / max. 180mA +5V / max. 230mA
Interface:
RS232
USB 1.1
CAN-Bus (internal required)
RS232 baud rate: 115200 baud
RS232 connector: SUB-D socket 9pin
CAN baud rate: 1MBaud
Display:

no

Ready LED green

Full Color TFT-Display (320x240
dots) with white back light led

Ready LED green
Control elements:

Standby/Power button

Reset button

Standby/Power button

Cursor buttons

incremental encoder

Reset button
Dimensions (H W D): 3HE 24TE 160mm
Weight: 0.2kg 0.3kg
table 9: technical data
8.5 communication & commands
8.5.1 communication via RS232
The
d-Drive can easily communicate with your PC with the use of a terminal program (for example
“hypertrm.exe” with Windows XP, please refer to your operating system’s manual).
A serial connection cable (included) is required to connect to your computer.