Geschäftsführer: Dr. Bernt G
ötz • Telefon 03641/66880 • Fax 03641/668866 • www.piezojena.com
55
8.2 system housing 84TE with power supply
8.2.1 function
There
are two 19” 84TE system housings with two different built-in wide range power supplies with
Power Factor Correction (PFC) that generate all the required high and low voltages.
On the back side of the housing there are 2 fuses, the power switch and the line filter. The short
housing is prepared to operate a maximum of 6 EVD50 digital piezo amplifiers and a data
exchange module with or without display. The deep housing with high power is prepared to operate
a maximum of 3 EVD300 digital piezo amplifiers and a data exchange module with or without
display. All modules are connected by a back plate.
8.2.2 technical data system housings
84TE 315mm depth
84TE 375mm depth
Operating voltage
100 - 240 VAC / 50 - 60 Hz
Input current
typ. 0.9A @ 115V
typ. 0.5A @ 230V
typ. 1.7A @ 115V
typ. 1.0A @ 230V
Power consumption
typ. 120W
typ. 230W
Primary fuses
2x T6.3A / 250V 5x20mm
Power connector
IEC-60320 C13
Output voltages
+145V / 300mA
-30V / 300mA
+15V / 500mA
-15V / 500mA
+5V / 2.2A
+145V / 450mA
-30V / 450mA
+15V / 500mA
-15V / 500mA
+5V / 2.2A
Dimensions (WxHxD) [mm]
450 x 150 x 360
450 x 150 x 420
Weight [kg]
4.8
7.3
Specifics
active cooling
active cooling,
auto power on
table 1: technical data
