English
32
USE
Function
Action
Display
Set startup time for
1st operating cycle.
Press SELECT MENU
to set the startup time,
advancing in ten-minute jumps (for example, you
want the stove to start up at 06:00). Confirm by
pressing the SET key.
MENU
SET
ESC
OPT
Set shutdown time
for 1st operating
cycle.
Press SELECT MENU
to set the shutdown time,
advancing in ten-minute jumps (for example, you
want the stove to shut down at 09:00). Confirm by
pressing the SET key.
MENU
SET
ESC
OPT
In this stage a shutdown time need not be set.
Press SELECT MENU
, set the readout
oFF
and
confirm by pressing the SET key.
MENU
SET
ESC
OPT
Set desired power for
first operating cycle.
Press SELECT MENU
to set the desired power
(for example you want power setting 1). Confirm
by pressing the SET key.
MENU
SET
ESC
OPT
Set
room
temperature for first
operating cycle.
Press SELECT MENU
to set the desired room
temperature (for example, you want a room
temperature of 25°C). Confirm by pressing the
SET key. When the desired temperature has been
reached the stove automatically reverts to power
setting P1 and the temperature can be read on the
remote or on the stove - see MULTICOMFORT
menu.
MENU
SET
ESC
OPT
Set
desired
Multifuoco fan speed
for first operating
cycle.
Press SELECT MENU
to set the desired fan
speed (for example, you want fan speed setting 1).
Confirm by pressing the SET key.
When programming the timer on the stove it is not
possible to set separate fan speeds.
MENU
SET
ESC
OPT
After having programmed the first operating cycle you may, if you wish,
proceed with programming the second operating cycle by going through
the settings in the order as described above. The number 2 appears on
the display to indicate the second operating cycle.
S T A R T
D
P R O G R A M
1
!
0 6 : 0 0
S T O P
D
P R O G R A M
1
!
0 9 : 0 0
S T O P
D
P R O G R A M
1
!
O F F
S E T
D
P O W E R
1
!
0 1
S E T
T E M P
R O O M
!
2 5
.
c
S E T
D
V E N T - 1
!
0 1
S T A R T
D
P R O G R A M
2
!
0 6 : 0 0
DT2040067-03
