English
49
TROUBLESHOOTING
PROBLEM
CAUSE
SOLUTION
Smoke sensor
"
N
NO
O C
CO
ON
NN
N
" stove status
No connection between 2-pin terminal
and electronic board
Check correct insertion/position of the
connector (see wiring diagram)
Faulty electronic board
Replace the electronic board (use only
original spares)
Badly positioned smoke sensor
Check that the sensor is correctly
connected
Appliance runs for 9-10 minutes and
then goes out
Heat sensor locked
Repeat ignition procedure. If the
problem
persists,
contact
an
authorised technician
Combustion gases have not reached the
required ignition temperature
Repeat ignition procedure. If the
problem persists, contact an authorised
technician
Heat sensor badly connected
Check the wiring and connections
Blocked flue
Clean flue system
Failed ignition
See "
NO ACC
"
Faulty electronic board
Replace the electronic board (use only
original spares)
Pellet-charging system blocked
Empty the pellet hopper; check and
clean the auger and chute
This instruction booklet contains all the necessary information for installation, operation and maintenance. Only call the Gruppo
Piazzetta S.p.A. service centre after having scrupulously followed all the instructions.