English
31
USE
The timer allows the user to programme the stove to start up and shut down automatically without any manual intervention.
Daily, weekly and weekend programmes can be selected with a maximum of two operating cycles in two separate timetable bands.
For example:
Cycle 1: from 6am until 9am
Cycle 2: from 8.30pm until 11pm
• In the DAILY programme the two timetable bands once established can be activated or deactivated for all the days of the week.
For example:
if you want the stove to operate from 6am to 9am every day
• In the WEEKLY programme the two timetable bands once established can be activated or deactivated for each day.
For example:
if you want the stove to operate from 6am to 9am on Monday, Tuesday, but not on Wednesday, and so on.
• In the WEEKEND programme the two timetable bands once established can be activated or deactivated for Friday, Saturday and
Sunday.
For example:
if you want the stove to operate from 6am to 9am on Friday, Saturday, but not on Sunday.
This kind of timer allows you to have three programmes (DAILY, WEEKLY and WEEKEND) stored permanently. The programmes can be
activated or deactivated using the SET TIMER menu. It is advisable to have only one programme active at a time to avoid overlapping.
WHEN USING THE TIMER FOR THE FIRST TIME, SET THE CLOCK WITH THE CURRENT DAY, HOUR AND MINUTES, as with a
new watch. To set the actual time, see the table SETTING THE CLOCK. This setting will only be necessary the first time
of activating the clock.
PROGRAM DAY - 1st operating cycle
Function
Action
Display
Select SET CHRONO
menu
Press the MENU key. Using the SELECT MENU
key select the
SET CHRONO
menu and confirm by
pressing the SET key.
MENU
SET
ESC
OPT
Select day
programme
Using the SELECT MENU
key select the day-
programme
PROGRAM DAY
menu and confirm by
pressing the SET key.
MENU
SET
ESC
OPT
Enable or disable
day programme
Press the SELECT MENU
key and select
oN
to
enable the day programme or
oFF
to disable the
day programme. Confirm by pressing the SET key.
If you have disabled the programme by selecting
oFF
and do not wish to carry out further
programming, press the ESC (EXIT) key to return to
the previous menu or the MENU key to return to the
initial display.
MENU
SET
ESC
OPT
S E T
C H R O N O
!
P R O G R A M
D A Y
!
E N A B L E
D A Y
!
O F F
6.8 TIMER
DT2010242-05
