User Manual
E727T0005, valid for E-727
BRO, 2019-06-28
Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany
Page 8 / 240
Phone +49 721 4846-0, Fax +49 721 4846-1019, Email
About this Document
This user manual contains information on the intended use of the E-727.
It assumes that the reader has a fundamental understanding of basic servo systems as well as
motion control concepts and applicable safety procedures.
The latest versions of user manuals and Technical Notes are available for download on our website
(p. 10).
Symbols and Typographic Conventions
The following symbols and markings are used in this user manual:
CAUTION
Dangerous situation
If not avoided, the dangerous situation will result in minor injury.
Actions to take to avoid the situation.
NOTICE
Dangerous situation
If not avoided, the dangerous situation will result in damage to the equipment.
Actions to take to avoid the situation.
Symbol
Meaning
Danger
If not avoided, the hazardous situation will result in death or serious injury.
Notice
If not avoided, the dangerous situation will result in damage to the equipment.
1.
2.
Action consisting of several steps whose sequential order must be observed
Action consisting of one or several steps whose sequential order is irrelevant
List item
p. 5
Cross-reference to page 5
SVO?
Command line or command from PI's General Command Set (GCS) (example:
command to get the servo mode)
RS-232
Operating element labeling on the product (example: socket of the RS-232
interface)
Device S/N
Parameter name (example: parameter where the serial number is stored)
Start > Settings
Menu path in the PC software (example: to open the menu, the Start and Settings
buttons must be clicked in succession)
5
Value that must be entered or selected via the PC software