Physio Control LIFEPAK 20, Manual

Page: 188 / 227

Appen
dix C
Screen Messages
LIFEPAK 20e Defibrillator/Monitor Operating Instructions C-5
©2006-2015 Physio-Control, Inc.
STAND CLEAR/PUSH
SHOCK BUTTON Stand clear of the patient and push the
SHOCK
button.
START CPR Initiate CPR in AED mode.
SWITCHING PRIMARY
TO LEAD II PADDLES
lead is not available and you pressed the
ANALYZE
button.
SWITCHING PRIMARY
TO PADDLES PADDLES
lead is available and you pressed the
ANALYZE
button.
TRANSMISSION
CANCELLED
Data transmission has been cancelled.
TRANSMISSION
COMPLETE
Data transmission completed successfully.
TRANSMISSION
FAILED
Data transmission was not successful.
UNABLE TO TRANSMIT
Unable to send data.
USE ECG LEADS The device is attempting synchronized cardioversion and
PADDLES
lead was selected.
USER TEST DID NOT
COMPLETE
Test plug not connected to QUIK-COMBO therapy cable, standard
paddles not seated in paddle wells, possible defective therapy cable,
or a problem with the defibrillator during user test.
USER TEST DID NOT
COMPLETE –
CONNECT TO TEST
PLUG
Test plug not connected to QUIK-COMBO therapy cable, standard
paddles not seated in paddle wells, defective therapy cable, or a
problem with the defibrillator during user test.
USER TEST FAILED
An unsuccessful user test has occurred.
USER TEST IN
PROGRESS
Confirms that the user test is in progress.
USER TEST
SUCCEEDED
A successful user test was completed.
XX% TRANSMITTED
Specified percent of the transmission is completed.
Table C-1
Summary of Screen Messages (Continued)
Message Description