Physio Control LIFEPAK 20, Manual

Page: 144 / 227

8
S
etu
p Opti
ons
Setup Options
LIFEPAK 20e Defibrillator/Monitor Operating Instructions 8-5
©2006-2015 Physio-Control, Inc.
MANUAL MODE SETUP MENU
The Manual Mode Setup menu allows you to define defibrillation and synchronized cardioversion
settings. When you select a menu item, the screen displays a help message. The underlined
options are factory default settings.
Table 8-2
Manual Mode Setup Menu
Menu Item Help Message Options
SYNC Set up sync defaults Refer to Table 8-3 .
PADDLES
DEFAULT Default energy for paddles
or QUIK-COMBO
electrodes Power-on energy setting for standard
paddles and therapy electrodes:
2, 5, 10,
50, 100, 125, 150, 175, 200 (joules), or
ENERGY PROTOCOL .
ENERGY
PROTOCOL... Energies for energy
protocol Refer to Table 8-4 .
INTERNAL
DEFAULT Default energy for internal
paddles Power-on energy setting for internal
paddles:
2 , 5, 10, 20, 30, or 50 .
VOICE PROMPTS Voice prompts active in
manual mode ON : Voice prompts active.
OFF
: Voice prompts inactive.
SHOCK TONE Tone when defibrillator is
fully charged
ON
: A tone sounds.
OFF: No tone.
MANUAL ACCESS Means for accessing
manual mode MANUAL / DIRECT: No restrictions to
manual mode.
AED / DIRECT:
No restrictions to AED
mode.
AED / CONFIRM
:
Confirmation required to
gain manual access.
AED / PASSCODE
:
Passcode required to
enter manual mode.
SET PASSCODE... Passcode required to
enter manual mode If configured for passcode access:
None: Default passcode enabled.
New: User-defined 4-digit code enabled.
Table 8-3
Synchronization Defaults
Menu Item Help Message Options
SYNC AFTER
SHOCK Resume sync after energy
transfer
ON
: Defibrillator returns to synchronous
mode after energy transfer.
OFF : Defibrillator returns to asynchronous
mode.
REMOTE SYNC Allow sync with remote
monitor ON : Remote synchronization active with
connection to a compatible remote monitor.
OFF
: No remote monitor connection active.