manualshive.com logo in svg

Physio Control LIFEPAK 20, Manual

The Stryker LIFEPAK 20 is an advanced medical device that provides life-saving interventions. Ensure optimal functionality with our comprehensive Inspection Procedure manual, available for free download on our website. Take advantage of this valuable resource to safeguard your device's performance and ensure top-notch patient care.

Share
Download
background image

Setup Options

8-2

LIFEPAK 20e Defibrillator/Monitor Operating Instructions

SETUP OPTIONS

Setup options allow you to define operating features for the LIFEPAK 20e defibrillator/monitor 
such as device identification numbers and default settings. 

Table 8-1

 through 

Table 8-21

 list all 

setup options along with the factory default settings.

Setup options can be selected in either of two ways:

• Use the Setup Options menu on the LIFEPAK 20e device. See 

"Entering Setup Options," 

page 8-3

, for more information.

• Use LIFENET Device Agent to manage setup options on the LIFEPAK 20e device. See the 

Help system for LIFENET Device Agent for more information.

Print Configurations Before Service or Repair

If the defibrillator receives service or repair that affects the internal memory components, such as 
replacement of the main printed circuit board, any changes previously made to the option 
definitions may be lost from memory. Before allowing service or repair, be sure to print the 
current user setup defaults so the customized definitions may be reentered after service or 
repair. (Refer to 

"Print Defaults," page 8-13

.)

Passcode Security

To prevent unauthorized access, a security passcode is required for access to the Setup menu 
and service mode (refer to 

page 8-14

). The LIFEPAK 20e defibrillator/monitor allows you to 

change both of these passcodes. The passcode definition is part of the device identification 
option.

Note: 

To use the defibrillator with any new settings, you must turn the defibrillator off and on 

again.

WARNING!

Possible improper defibrillator performance.

Changing factory default settings will change the behavior of the device. Changes to the default 
settings must only be made by authorized personnel.

WARNING!

Possible ineffective energy delivery.

Service mode is for authorized personnel only. Improper use of service mode may inappropriately 
alter the defibrillator’s configuration and may change energy output levels. Contact service 
personnel for assistance or information about defibrillator configuration.

Summary of Contents for LIFEPAK 20




































































































































































































































Reviews:

No comments

Related manuals for LIFEPAK 20

MacDon C Series Unloading And Assembly Instructions preview
C Series
Brand: MacDon Pages: 17
Olympus C Series Instructions Manual preview
C Series
Brand: Olympus Pages: 50
VAHVA C Series Operating And Safety Manual preview
C Series
Brand: VAHVA Pages: 19
GE Profile Series Installation And Startup preview
Profile Series
Brand: GE Pages: 24
Haag-Streit BQ 900 Instructions For Use Manual preview
BQ 900
Brand: Haag-Streit Pages: 18
Haag-Streit IM 900 Instruction Manual preview
IM 900
Brand: Haag-Streit Pages: 20
V-TEK PT-55 Quick Start Manual preview
PT-55
Brand: V-TEK Pages: 2
V-TEK PT-55 User Manual preview
PT-55
Brand: V-TEK Pages: 112
Ultraflex K65 Installation Instructions preview
K65
Brand: Ultraflex Pages: 3
NanoVibronix UROSHIELD Quick Manual preview
UROSHIELD
Brand: NanoVibronix Pages: 2
NanoVibronix PainShield User Manual preview
PainShield
Brand: NanoVibronix Pages: 32
Nanoleaf Shapes Hexagons User Manual preview
Shapes Hexagons
Brand: Nanoleaf Pages: 27
Labnet Prism Instruction Manual preview
Prism
Brand: Labnet Pages: 12
Hach HQ Series User Manual preview
HQ Series
Brand: Hach Pages: 456
Harken 3294 Instructions preview
3294
Brand: Harken Pages: 4
Eaton Cutler-Hammer ATC-300 Instruction Booklet preview
Cutler-Hammer ATC-300
Brand: Eaton Pages: 32
Garmin GSD 25 Installation Instructions preview
GSD 25
Brand: Garmin Pages: 2
GE LOGIQ Totus Basic Service Manual preview
LOGIQ Totus
Brand: GE Pages: 644

Brands by name

Popular brands

Load more brands