Physio Control LIFEPAK 20, Manual

Page: 148 / 227

8
S
etu
p Opti
ons
Setup Options
LIFEPAK 20e Defibrillator/Monitor Operating Instructions 8-9
©2006-2015 Physio-Control, Inc.
PACING SETUP MENU
The Pacing Setup menu allows you to define noninvasive pacemaker settings. When you select
a menu item, the screen displays a help message. The underlined options are factory default
settings.
MONITORING MENU
Use the Monitoring menu to define settings for the ECG and SpO
2
monitoring. When you select a
menu item, the screen displays a help message. The underlined options are factory default
settings.
Channels Setup Menu
To define the default set and up to five optional waveform sets for Channels 1 and 2, select an
item from the Channels Setup menu.
Table 8-9
Pacing Setup Menu
Menu Item Help Message Options
RATE Default pacing rate 40–170 , 60 PPM .
CURRENT Default pacing current 0 – 200 mA .
MODE Default pacing mode DEMAND or NON-DEMAND .
INTERNAL
PACER Detect internal pacemaker and
print arrows DETECTION OFF or DETECTION ON.
Table 8-10
Monitoring Menu
Menu Item Help Message Options
CHANNELS... Set up default channel
waveforms Refer to Table 8-11 .
CONTINUOUS ECG Continuously store ECG
waveform
ON
or
OFF
.
SPO2 TONE SpO2 pulse tone
ON
or
OFF
.
CO2... Set up CO2 defaults Refer to Table 8-13 .
Table 8-11
Channels Setup Menu
Menu Item Help Message Options
Default SET Select default waveform set SET 1 , SET 2 , SET 3 , SET 4 , or SET
5 .
SET 1 Select channel waveforms for Set 1 Refer to Table 8-12 .
SET 2 Select channel waveforms for Set 2 Refer to Table 8-12 .
SET 3 Select channel waveforms for Set 3 Refer to Table 8-12 .
SET 4 Select channel waveforms for Set 4 Refer to Table 8-12 .
SET 5 Select channel waveforms for Set 5 Refer to Table 8-12 .