Photron Fastcam MC1 Hardware Manual Download Page 114

Page: 114 / 141

Chapter 6. System Settings

112

6.1. Display Settings

In addition the image, the

FASTCAM MC1

can display many types of information necessary for

recording on the video monitor. The procedure for setting the display of this information on the video

monitor is explained here.

6.1.1. Changing the Date/Time Display

Either the date or the time can be selected and displayed on the screen. The procedure for the

displaying this is explained here.

1. Press the

MENU

key on the keypad and the menu list will display.

2. Select

DATE/TIME

from the

OTHERS

submenu with the

ARROW

keys on the keypad and

press the

ENTER

key.

3. The

DATE/TIME

menu is displayed.

4. Select

DATE/TIME

with the

ARROW

↑↓

keys. The selected option is displayed on the

screen.

5. When finished, press the

ENTER

key to complete the setting.

6. Verify that the date or the time is displayed according to the option set.

Time Display Setting

Date Display Setting

Summary of Contents for Fastcam MC1














































































































































Search results

Summary of Contents for Fastcam MC1

Reviews:

Related manuals for Fastcam MC1

Brands by name

Popular brands

Photron Fastcam MC1, Hardware Manual

Search results

Summary of Contents for Fastcam MC1

Reviews:

Related manuals for Fastcam MC1

Brands by name

Popular brands