Photron Fastcam MC1 Hardware Manual Download Page 65

Page: 65 / 141

FASTCAM MC1 Hardware Manual

3.6. Color Enhancement Adjustment (Color Models Only)

Image color enhancement level is adjusted in five steps including OFF setting, with this setting

item.

1. Press

MENU

key on the keypad, then select the

COLOR ENHANCEMENT

from the

ADJUSTMENT

submenu and press

ENTER

key.

2. The setting items are displayed. The function of each item is explained in the list below.

3. Use the

↑↓

ARROW

keys to select one of the modes listed above. When finished, press

the

ENTER

key to complete the setting.

Menu display

Content

OFF

Turns color enhancement mode off.

MODE1

Sets the x0.5 color enhancement.

MODE2

Sets the x1 (default) color enhancement.

MODE3

Sets the x1.5 color enhancement.

MODE4

Sets the x2 color enhancement.

Summary of Contents for Fastcam MC1














































































































































Search results

Summary of Contents for Fastcam MC1

Reviews:

Photron Fastcam MC1, Hardware Manual, Page: 65 / 141

Search results

Summary of Contents for Fastcam MC1

Reviews: