Photron Fastcam MC1, Hardware Manual

Page: 8 / 141

6
Always unplug the camera when cleaning it or when it is unused for a long period
of time.
Leaving or storing the camera connected to the power source might cause fire
from insulation deterioration or electrical discharge.
Do not set the camera in a location where the temperature might get unusually hot.
The inside or trunk of a car can get especially hot in summer.
Doing so can cause the outer case and internal components to deteriorate or
cause a fire.
Do not set the camera in a location prone to oily smoke or steam, or in a location
with a lot of humidity or dust.
Oil, moisture, and dust conduct electricity, which can cause a fire or electric
shock.
Ambient temperature 0-40℃, Humidity 85% RH or lower, Maximum altitude 2000
m or lower. In addition, if exceeding these limits, use in a condensation-free
environment.
Using the camera outside these limits might cause malfunction.
Do not store the equipment in a location where the temperature goes below -20℃
or higher than 60℃.
Also keep condensation from forming in the system.
When shipping, remove the cable connecting the camera controller and the
imager and put the equipment in its original packaging or in a specialized carrying
case.
Do not ship the equipment in an environment where the temperature goes below
-20 ℃ or higher then 60 ℃ and prevent condensation from forming during
shipment.
Caution