Photron Fastcam MC1, Hardware Manual

Page: 94 / 141

Chapter 3. Recording
92
3.16. Using USER SW (Programmable Switch)
There are four switches that can be set on the front of the FASTCAM MC1 camera controller.
Settings for the switches are made from the menu, and they can each be assigned a different
function.
As an example, setting the USER1 switch on the front of the camera controller is explained here.
1. Press the MENU key on the keypad and the menu list will display.
2. Select the USER1 from the USER SW SET submenu with the ARROW keys on the keypad
and press the ENTER key.
3. On the left side of the screen, the list of functions that can be set is displayed, select the
function to be used and press the ENTER key. The available functions are explained in the
chart below.
Setting Name Explanation
FRAMERATE SEL Can raise the frame rate.
RESOLUTION SEL Can lower the resolution.
SHUTTER SEL
Can raise the shutter speed.
TRIGGER SEL Can change the trigger mode.
FIT The same function as the keypad's FIT key.
STATUS The same function as the keypad's STATUS key.
LIVE The same function as the keypad's LIVE key.
REC READY The same function as the keypad's REC READY key.
REC The same function as the keypad's REC key.
LOW LIGHT The same function as the keypad's LOW LIGHT key.