Photron Fastcam MC1, Hardware Manual

Page: 111 / 141

FASTCAM MC1 Hardware Manual
109
5.1.3. Using DHCP (Dynamic Host Configuration Protocol)
The camera is DHCP capable. In an environment where DHCP is used, the camera’s IP address
can be acquired from the DHCP server.
Setting Procedure
1. Press the MENU key on the keypad and the menu list will display
2. Select the DHCP from the OTHERS submenu with the ARROW keys on the keypad and
press the ENTER key.
3. Use the ARROW
↑↓
keys to select ON or OFF.
4. Press the ENTER key to confirm.
・
When OFF is selected, the IP address specified in the previous section “ 5.1.2. Setting the
Camera Controller’s IP Address ” is valid.
・
When ON is selected, the IP address is acquired from the DHCP server, and the acquired IP
address is valid. If the system is not connected to the DHCP server, the IP address is acquired
when a connection to the server is made. It is possible to verify the acquired IP address with
the DIGITAL I/F SET menu. In this case, the IP address cannot be changed.
When using the system with DHCP on, set the IP address on the PFV to “Auto detection”.
For details, refer to the “Photron FASTCAM Viewer User’s Manual”.