Photron Fastcam MC1, Hardware Manual

Page: 55 / 141

FASTCAM MC1 Hardware Manual
53
3. The display used to specify the before/after trigger frame count is shown on the left side of
the screen.
4. The meaning of each item is explained next.
-FRAME The number of frames to save BEFORE the trigger is received.
+FRAME The number of frame to save AFTER the trigger is received.
TOTAL FRAME Shows the total number of frames that can be recorded.
When -FRAME = 1, +FRAME = TOTAL FRAME-1, the same as START mode
When -FRAME = TOTAL FRAME-1, +FRAME = 1, the same as END mode
When -FRAME = +FRAME, the same as CENTER mode
5. Set the before trigger frame count. Operate the cursor with the keypad ARROW keys to set
the desired frame count. By changing the before trigger frame count (-FRAME), the after
trigger frame count (+FRAME) increases and decreases automatically in accordance with
the record able frame count (TOTAL FRAME).
↑
Up
Raise/Lower Value
Down
↓
←
Left Move Frame Count Digit Right
→