Photron Fastcam MC1 Page 119 Hardware Manual Download

Page: 119 / 141

FASTCAM MC1 Hardware Manual

117

6.1.6. Keypad LCD Settings

There are three settings for the keypads LCD display, BRIGHT (brightness), CONTRAST

(contrast), and COLOR (tint).

1. Press the

MENU

key on the keypad and the menu list will display.

2. Select

KEYPAD

from the

DISPLAY

submenu with the keypad

ARROW

keys and press the

ENTER

key

3. Select

BRIGHT

CONTRAST

, or

COLOR

with the keypad

↑↓

keys and press the

ENTER

key.

■

BRIGHT

Setting

Change the LCD’s brightness with the keypad

↑↓

keys.

The

↑

key brightens, the

↓

key darkens.

■

CONTRAST

Setting

Change the LCD’s contrast with the keypad

↑↓

keys.

The

↑

key increases the contrast, the

↓

key decreases the contrast.

■

COLOR

Setting

Change the LCD’s tint with the keypad

↑↓

keys.

Summary of Contents for Fastcam MC1














































































































































Search results

Summary of Contents for Fastcam MC1

Reviews:

Related manuals for Fastcam MC1

Brands by name

Popular brands

Photron Fastcam MC1, Hardware Manual

Search results

Summary of Contents for Fastcam MC1

Reviews:

Related manuals for Fastcam MC1

Brands by name

Popular brands