Photron Fastcam MC1 Page 36 Hardware Manual Download

Page: 36 / 141

Chapter 2. Setup

2.4.4. Menu Selection/Confirmation/Cancellation

The menu list has a hierarchical structure made of the “menu”, “submenu”, and “setting” layers, in

that order. The cursor “

▼

” on the menu can be moved and the necessary menu commands can be

selected by pressing the keypad

ARROW

keys.

The procedure for changing a setting is explained next.

1. Select an item on the menu using the

ARROW

↑↓

(up and down) keys.

2. Find the item to set in the submenu and press the

→

(Right) key to move to the submenu.

To return to the menu from the submenu, press the

←

key.

3. Move to the item to set using the

↑↓

keys and press the

ENTER

key.

4. The setting item will appear on the left side of the screen that had displayed the menu. Use

the

ARROW

keys to change the setting. To return to the submenu from the setting item,

press the

MENU

key or the

BACK

key.

5. After changing the setting, completed your selection by pressing the

ENTER

key.

The

▼

cursor on the left side of the menu can be moved by

pressing the

ARROW keys

Summary of Contents for Fastcam MC1














































































































































Search results

Summary of Contents for Fastcam MC1

Reviews:

Related manuals for Fastcam MC1

Brands by name

Popular brands

Photron Fastcam MC1, Hardware Manual

Search results

Summary of Contents for Fastcam MC1

Reviews:

Related manuals for Fastcam MC1

Brands by name

Popular brands