manualshive.com logo in svg

Phoenix Contact 2700290, User Manual, Page: 89 / 154

Share
Download
Phoenix Contact 2700290 User Manual Download Page 89

(Rapid) Spanning Tree

8089_en_03

PHOENIX CONTACT

113

(R)STP port configuration table

Figure 5-5

“(R)STP Port Configuration Table” web page

An overview of the main settings for each port is provided here.

5.2.1.1

(R)STP port configuration

This page displays the valid (R)STP configuration settings for the selected port.
If termination devices or subnetworks are connected without RSTP or STP via a port, it is

recommended that the “Admin Edge Port” be set to “Edge Port”. In this way, a link modifica-

tion at this port does not result in a topology modification.

5.2.1.2

Switch/port ID

The validity of switches and ports is determined according to priority vectors.

Modifications of properties can result in complete reconfiguration of (Rapid) Spanning

Tree.

It is recommended that a suitable root switch and a backup root switch are specified using

corresponding priority assignment.

Summary of Contents for 2700290



























































































































































Reviews:

No comments