manualshive.com logo in svg

Phoenix Contact 2700290, User Manual, Page: 47 / 154

Share
Download
Phoenix Contact 2700290 User Manual Download Page 47

Configuration and diagnostics

8089_en_03

PHOENIX CONTACT

47

4.3

Simple Network Management Protocol (SNMP)

4.3.1

General function

SNMP is a manufacturer-independent standard for Ethernet management. It defines com-

mands for reading and writing information, and defines formats for error and status mes-

sages. SNMP is also a structured model that consists of agents, their relevant Management

Information Base (MIB) and a manager. The manager is a software tool that is executed on

a network management station. The agents are located inside switches, BK modules, rout-

ers, and other devices that support SNMP. The task of the agents is to collect and provide

data in the MIB. The manager regularly requests and displays this information. The devices

can be configured by writing data from the manager to the MIB. In the event of an emer-

gency, the agents can also send messages (traps) directly to the manager.

4.3.2

Schematic view of SNMP management

Figure 4-31

Schematic view of SNMP

All configuration modifications, which are to take effect after a SMN restart, must be saved

permanently using the “flWorkFWCtrlConfSave” object.

Summary of Contents for 2700290



























































































































































Reviews:

No comments