Phoenix Contact 2700290, User Manual, Page: 117 / 154

Multicast filtering
8089_en_03 PHOENIX CONTACT
141
The fourth byte from the right is always replaced by 01:00:5e during conversion. See ex-
ample below:
The group is added to the list of existing static multicast groups. This list, which is displayed
in a list box, is referred to as “dot1qStaticMulticastTable” in SNMP.
Port assignment After entering a new group in the “Multicast Group Address” field, add the ports of the group
members by selecting the corresponding checkboxes. Confirm by entering your password
and clicking on “Apply”.
Because of the conversion from IP to MAC addresses, you should avoid using IP address-
es that differ by 128 in the third byte from the right. Example:
Both multicast IP addresses are converted into multicast MAC address
01:00:5e:1e:75:d8.
Settings are not automatically saved permanently. The active configuration can be saved
permanently by selecting “Save current configuration” on the “Configuration Manage-
ment” web page.