Phoenix Contact 2700290, User Manual, Page: 37 / 154

Configuration and diagnostics
8089_en_03 PHOENIX CONTACT
37
Set default upon delivery This option can be used to reset the switch to its default settings (default upon delivery) by
entering a valid password.
Figure 4-14 “Set default upon delivery” web page
Load the last stored con-
figuration
This option can be used to reactivate the last configuration stored on the device. All modifi-
cations made to the configuration since it was last saved are lost.
Figure 4-15 “Load the last stored configuration” web page
“Configuration Management, File Transfer” menu
Configuration file transfer This option can be used to save your device configuration on a PC or to operate the switch
using a stored configuration.
Figure 4-16 “File Transfer” web page
WBM can only be called using a valid IP address. Once the switch has been reset to its
default settings, it has no valid IP address and the addressing mechanism is set to BootP.
When a configuration is uploaded from the SMN to a PC, the last saved version is trans-
mitted. Should you wish to transmit the active configuration, it is recommended that you
save it again beforehand (“Save current configuration” function).
When a configuration is downloaded from the PC to a SMN, the new configuration is only
activated once the switch has been reset.
The use of a configuration file does not affect an existing (“old”) password.