Phoenix Contact 2700290, User Manual, Page: 38 / 154

Smart Managed Compact Switch
38
PHOENIX CONTACT 8089_en_03
Device replacement
“Configuration Management, Memory Plug” menu
Memory plug
Figure 4-17 “Memory Plug” web page
Following a “host to device” file transfer, some configuration modifications will take effect
immediately, others will only take effect after a reset.
The SMN must be reset in order to ensure consistency.
Configuration using a configuration file is used when replacing devices. To duplicate de-
vices using a configuration file, observe the following:
–
Create a point-to-point connection between an SMN and the management station.
– Load the configuration file on the SMN.
– Reset the SMN.
– Adjust the IP parameters.
– Save the configuration (“Save current configuration” function).
The duplicated switch can now be operated in the network using the adjusted IP param-
eters.